+- NordInvasion Forum (https://forum.nordinvasion.com)
+-- Forum: Discussions (https://forum.nordinvasion.com/forumdisplay.php?fid=7)
+--- Forum: Community Projects (https://forum.nordinvasion.com/forumdisplay.php?fid=19)
+---- Forum: Models and Textures (https://forum.nordinvasion.com/forumdisplay.php?fid=78)
+---- Thread: Looking for tips (/showthread.php?tid=67765)
Looking for tips - Odi - 21-05-2018
Was wondering if anyone had any tips on how to improve my model
https://p3d.in/N5Ouz
RE: Looking for tips - DR. - 21-05-2018
100% convex 0% concave
RE: Looking for tips - PioPio - 21-05-2018
I would make it a little bit straighter
RE: Looking for tips - Coconut - 21-05-2018
textures
RE: Looking for tips - Odi - 21-05-2018
(21-05-2018, 04:47 PM)Coconut Wrote: texturesI have textured it quickly was just wondering if there were any improvements I could make before going and doing a proper texture
RE: Looking for tips - Niezdara - 22-05-2018
- Every edge is smooth, while only some of them should be.
- Afaik, there are too many faces used for the handle. You could still get a good result using less of them. If it supposed to be used in game, then its a part of a weapon you see rarely while it still has to be rendered all the time.
- There are some faces missing - bottom part of the blade that extends backwards (I think its called a butt or a hammer).
- The Blade is slightly misaligned with the shaft - they probably should be centered along axis.
- It would be better to have separate solids of a blade and a butt, as long as making textures is concerned. That could be done be a simple boolean operation - substracting the shaft solid from the blade soild. That way you will know at which point they connect with the shaft (that area is usually darker).
- Not sure what material is used for the shaft, but if its wood then its afaik a bit too thin.